One construction
technique that is gaining popularity today is the Brisbane core drilling. It is performed when you need an accurate drilling for precise circular penetration. This strategy includes non-percussive drilling in creating smooth holes.
In general, people choose this method
because of its dust-free and low noise
characteristic.
The holes are
drilled to enable utility penetrations as well as many other installation applications in the construction industry.
Through the holes of Brisbane core drilling, it gives way to heating and electrical
installations and plumbing works.
The
kind of hole that needs drilling and the technique
used for drilling the holes depends on the materials to be drilled and the
purpose. For example, an electric
method is used for gravestones, concrete
and, granite. The same drilling technique is
also utilized on floors, walls, or certain areas that need installations of anchoring systems. It is ideal
to use the hydraulic method for making larger holes,
which includes using electronic and mechanical
protection.
Brisbane core drilling is
not performed to install materials in construction projects. Also, it is typically done before a concrete removal. A series of holes are drilled close to one another, which is called as line coring or
line drilling. By doing this, it is easy to remove concrete
floors in square shaped pieces. This method is less hassle and less clutter.
In essence, you
can do core drilling by yourself, particularly
minor works such as wall installations.
But, it is better
to leave it with the professional
contractors who have the right equipment to do
the job for you efficiently.
Drilling a Hole
When
drilling core, it is not advisable to use hammer action. The drilling action
has to be smooth as much as possible, and the jerky motion of the hammer can
snap the teeth of the equipment easily.
If you
can drill right through the wall in setting, the core drill will clear out the core at the exit. But, if the
hole depth is longer than the drill bit,
then take out the drill bit and cut the
core with a hammer and bolster.
Make
sure to hold the drill and core bit at the dead
level when drilling your hole. Drilling at an angle may make the hole to
slope up or down. Repeat the process several times to reach the other side of
the hole. After that, you can decrease the pressure.
If you
continue forcing the core cutter through, you will force a huge amount of masonry
when you break through from the outside of the hole.
It is better to
let the drill guiding bit to penetrate the wall, for a precise cut. You can
finish the hole from the other side afterwards.
This ensures a neat entry and exit hole.
Conclusion
Pick a company
that specializes in concrete cutting, core drilling, and coring contracting. They
know how to manage all aspects that include
your concrete project. They should keep strict
standards and impose them to their team
to maintain the highest quality of services they can provide. So, if you want
to get the job done fast and correctly, choose the best company.
